Anti-terror bollards

XPASS B 275/800 L

Manufacturer: Bft Automation show products

Anti-terrorism bollards tested and certified (crash-tested) by an independent body according to standards PAS 68 and IWA14-1 (equivalent to American standard “K4”). Each bollard has an independent pump so that in the event of a control unit failure, the other bollards in the environment remain functional.


 Operator hydraulic bollard
 Voltage 230v
 Shaft height 800 mm
 Thickness 10mm
 Shaft diameter 275 mm
 Rising time 7 sec
 Shaft treatment* RAL 7015 painted steel and reflective film h:100 mm
 Lowering time 4 sec
 Control unit PERSEO CBE 230.P SD
 Break-in resistance 800000J
 Frequency of use 2000 op/day
 Anti-terrorism reference standard PAS68:2013 rising bollard V/7500 [N2]/48/90
IWA14-1:2013 rising bollard V/7200 [N2A]/48/90
 Type of limit switch reed magnetic sensor
 Manual operation reversible with no power
 Ambient conditions 40°C +60°C

*if the code contains LI: LI= AISI 304 or AISI 316 stainless steel on request.

Units C2-C3 The Embankment Business Park,
Vale Road, Heaton Mersey, Stockport SK4 3GL
T. +44 161 456 0456
F. +44 161 456 9090

Enterprise House, Murdock Road,

Dorcan, Swindon, SN3 5HY
T. +44 1488 674 750
F. +44 1488 674 790

Unit D3 City Link Business Park, Old Naas Road

Dublin 12, Ireland
T. +353 1 456 4711
F. +353 1 450 8337

The contents of this website (images, technical descriptions, illustrations) are the exclusive property of Bft s.p.a. Reproduction in any form and on any medium is forbidden. Copyright © 2020. All rights reserved. The information given in this publication is only a guide. Bft reserves the right to make any changes without prior notice.

Please publish modules in offcanvas position.